Trade Tracks 220 Forfar St. E. Fergus, Ontario N1M 2X7 519 831 5436 tradetracks.swcl@gmail.com
Showcase 2027 · May 28, 2027

Safety and supervision

Educators are responsible for assessing each activity, selecting age-appropriate tools and materials, providing appropriate instruction and supervision, and complying with all school, school-board, facility and applicable health and safety requirements. Activities must be modified or omitted when appropriate.

Understand Career Pathways

Grade 9 Educator Guide

How do people move from school into skilled careers, and what can I experience now to understand those pathways?

How to Use This Educator Guide

This is a ready-to-teach five-lesson Trade Tracks sequence. It is an exploration resource, not a career-selection program. Students should leave with more visibility, better questions and stronger evidence, not a requirement to declare a trade.

Permanent Lesson Architecture

Minds-On → Learn → Hands-On Trade Task → Career Centre Investigation → Workbook Evidence → Reflection → Next Step

Grade-Level Learning Goals

  • Progress through Rotate • Try • Compare • Document.
  • How do people move from school into skilled careers, and what can I experience now to understand those pathways?
  • Use PATH and WHAT / WHY / WHO / HOW to investigate work accurately.
  • Recognize transferable skills across careers and PATH areas.
  • Develop dual metric/imperial measurement literacy where work requires it.
  • Identify an age-appropriate next exploration or transition step.

Safety, Privacy & Measurement

Safety: All activities are classroom approximations of skilled work. Use only teacher-approved materials, tools and spaces. Do not perform energized electrical work, vehicle repair, pressurized-system work, hot work, cutting/grinding, work at height, or power-tool operations unless the school already permits the activity and a qualified teacher provides the required supervision, PPE and procedures. Students may stop an activity when unsure or unsafe.
Measurement: Canada is a dual-measurement workplace. Students should become comfortable reading and communicating both metric and imperial/US customary measurements where a trade commonly uses them. Use 1 inch = 25.4 mm exactly and 1 foot = 12 inches = 304.8 mm. For classroom estimation, 1 metre ≈ 3.28 feet. Teach students to work in the unit system specified on a drawing or work order, convert only when necessary, label every value with units, and avoid false precision after conversion.
Privacy: Career Centre research should use school-approved browsing. Students should not create personal accounts, enter personal information, or contact employers as part of a classroom assignment unless the school and family have approved that activity.
Grade 9 • Lesson 1 • 60–75 minutes

TRY IT — Four PATH Skills Stations

Purpose: Experience several safe approximations of skilled-work behaviours before researching pathways.

Learning Goals

  • Explain the purpose of the day’s work in relation to understand career pathways.
  • Use evidence from an applied task or Career Centre rather than guessing.
  • Connect a skill, tool, workplace practice or pathway to at least one real career.
  • Communicate measurements with units and use metric/imperial information appropriately where relevant.

Success Criteria

  • I can complete the task safely and follow the agreed procedure.
  • I can describe WHAT I did and WHY accuracy, technique or planning mattered.
  • I can identify WHO uses a similar skill and HOW someone can learn it professionally.
  • I can record evidence in my workbook and identify a reasonable next question.

Teacher Preparation

  • Review the task and school safety requirements.
  • Prepare the listed workbook page and an offline Career Centre option if devices are limited.
  • Preselect two to six Career Centres appropriate to the activity.
  • Prepare accessible roles so every student can contribute through measuring, observing, recording, organizing, testing or presenting.

Materials

  • Student workbook or printed activity page
  • Trade Tracks Career Centres or printed screenshots
  • Pencils/markers and chart paper as needed
  • Teacher-approved classroom-safe task materials
  • Metric/imperial measuring tools where relevant

Minds-On — 8–10 minutes

Show a familiar object, image, work order, drawing or short scenario connected to the lesson. Ask students what they notice, what they would need to know before acting, and which details could affect safety, quality, cost or service.

Learn — 10–15 minutes

Model the key concept using think-aloud language. Explicitly distinguish observation from assumption. Where measurement appears, model unit labels and explain whether the task is being completed in metric, imperial, or both.

Hands-On Trade Task — Trade Skills Stations

Rotate through measuring/layout, fastening/assembly, route/logistics, and service/inspection stations. No energized circuits or unsupervised power tools.

Student sequence: Plan → identify hazards/constraints → perform the classroom-safe task → check/measure → record evidence → improve or recommend a next step.

WHAT: Students name the actual action. WHY: They explain why technique/accuracy matters. WHO: They identify careers using similar work habits. HOW: They investigate a learning or apprenticeship pathway.

Measurement Practice

Canada is a dual-measurement workplace. Students should become comfortable reading and communicating both metric and imperial/US customary measurements where a trade commonly uses them. Use 1 inch = 25.4 mm exactly and 1 foot = 12 inches = 304.8 mm. For classroom estimation, 1 metre ≈ 3.28 feet. Teach students to work in the unit system specified on a drawing or work order, convert only when necessary, label every value with units, and avoid false precision after conversion.

Career Centre Investigation — 15–20 minutes

Suggested starting careers: Career Centres from all four PATH areas. Students use WHAT / WHY / WHO / HOW to record two tasks, two skills, a workplace, one tool/technology, one pathway fact and one unanswered question. They should compare the Career Centre information with the behaviours used in the physical task.

Discussion Questions

  • What part of the task required the most attention?
  • What would change if this were real work for a customer, employer or community?
  • Where could a measurement, sequence or communication error cause a problem?
  • Which career used a similar skill in a different material or setting?
  • What would you need to learn before doing this professionally?

Workbook Evidence

Station Passport. The student product for the lesson is Skills Station Passport.

Assessment for / as / of Learning

  • For: teacher questioning during planning and task setup.
  • As: student self-check using evidence from the task.
  • Of: workbook product, Career Centre research and explanation of the task-career connection.

Differentiation & Accessibility

  • Offer measuring, observing, organizing, recording, building and presenting roles.
  • Provide pre-marked examples, larger-print drawings, visual steps, speech-to-text or scribe support as required.
  • Allow students to demonstrate understanding orally, visually or through a model where appropriate.
  • Do not assess physical speed or strength; assess reasoning, procedure, evidence and reflection.

Extension

Ask students to locate a second Career Centre from a different PATH area that uses the same transferable skill. Compare how the context, tools and consequences of accuracy differ.

Exit Ticket / Reflection

The station that made me ask the most questions was _____ because _____.

Grade 9 • Lesson 2 • 60–75 minutes

READ IT — Drawings Become Work

Purpose: Interpret simple drawings, symbols, dimensions and instructions.

Learning Goals

  • Explain the purpose of the day’s work in relation to understand career pathways.
  • Use evidence from an applied task or Career Centre rather than guessing.
  • Connect a skill, tool, workplace practice or pathway to at least one real career.
  • Communicate measurements with units and use metric/imperial information appropriately where relevant.

Success Criteria

  • I can complete the task safely and follow the agreed procedure.
  • I can describe WHAT I did and WHY accuracy, technique or planning mattered.
  • I can identify WHO uses a similar skill and HOW someone can learn it professionally.
  • I can record evidence in my workbook and identify a reasonable next question.

Teacher Preparation

  • Review the task and school safety requirements.
  • Prepare the listed workbook page and an offline Career Centre option if devices are limited.
  • Preselect two to six Career Centres appropriate to the activity.
  • Prepare accessible roles so every student can contribute through measuring, observing, recording, organizing, testing or presenting.

Materials

  • Student workbook or printed activity page
  • Trade Tracks Career Centres or printed screenshots
  • Pencils/markers and chart paper as needed
  • Teacher-approved classroom-safe task materials
  • Metric/imperial measuring tools where relevant

Minds-On — 8–10 minutes

Show a familiar object, image, work order, drawing or short scenario connected to the lesson. Ask students what they notice, what they would need to know before acting, and which details could affect safety, quality, cost or service.

Learn — 10–15 minutes

Model the key concept using think-aloud language. Explicitly distinguish observation from assumption. Where measurement appears, model unit labels and explain whether the task is being completed in metric, imperial, or both.

Hands-On Trade Task — Read the Drawing — Build the Object

Build a cardboard/fastener model from a simple dual-dimension drawing. Check finished dimensions in mm and inches.

Student sequence: Plan → identify hazards/constraints → perform the classroom-safe task → check/measure → record evidence → improve or recommend a next step.

WHAT: Students name the actual action. WHY: They explain why technique/accuracy matters. WHO: They identify careers using similar work habits. HOW: They investigate a learning or apprenticeship pathway.

Measurement Practice

Canada is a dual-measurement workplace. Students should become comfortable reading and communicating both metric and imperial/US customary measurements where a trade commonly uses them. Use 1 inch = 25.4 mm exactly and 1 foot = 12 inches = 304.8 mm. For classroom estimation, 1 metre ≈ 3.28 feet. Teach students to work in the unit system specified on a drawing or work order, convert only when necessary, label every value with units, and avoid false precision after conversion.

Career Centre Investigation — 15–20 minutes

Suggested starting careers: Carpenter; Machinist; Welder; Sheet Metal Worker. Students use WHAT / WHY / WHO / HOW to record two tasks, two skills, a workplace, one tool/technology, one pathway fact and one unanswered question. They should compare the Career Centre information with the behaviours used in the physical task.

Discussion Questions

  • What part of the task required the most attention?
  • What would change if this were real work for a customer, employer or community?
  • Where could a measurement, sequence or communication error cause a problem?
  • Which career used a similar skill in a different material or setting?
  • What would you need to learn before doing this professionally?

Workbook Evidence

Drawing-to-Object Record. The student product for the lesson is Drawing Literacy Page.

Assessment for / as / of Learning

  • For: teacher questioning during planning and task setup.
  • As: student self-check using evidence from the task.
  • Of: workbook product, Career Centre research and explanation of the task-career connection.

Differentiation & Accessibility

  • Offer measuring, observing, organizing, recording, building and presenting roles.
  • Provide pre-marked examples, larger-print drawings, visual steps, speech-to-text or scribe support as required.
  • Allow students to demonstrate understanding orally, visually or through a model where appropriate.
  • Do not assess physical speed or strength; assess reasoning, procedure, evidence and reflection.

Extension

Ask students to locate a second Career Centre from a different PATH area that uses the same transferable skill. Compare how the context, tools and consequences of accuracy differ.

Exit Ticket / Reflection

A drawing prevented confusion when _____.

Grade 9 • Lesson 3 • 60–75 minutes

WORK SAFE — Plan Before Action

Purpose: Recognize hazards, controls, PPE and stop-work responsibility as part of professional practice.

Learning Goals

  • Explain the purpose of the day’s work in relation to understand career pathways.
  • Use evidence from an applied task or Career Centre rather than guessing.
  • Connect a skill, tool, workplace practice or pathway to at least one real career.
  • Communicate measurements with units and use metric/imperial information appropriately where relevant.

Success Criteria

  • I can complete the task safely and follow the agreed procedure.
  • I can describe WHAT I did and WHY accuracy, technique or planning mattered.
  • I can identify WHO uses a similar skill and HOW someone can learn it professionally.
  • I can record evidence in my workbook and identify a reasonable next question.

Teacher Preparation

  • Review the task and school safety requirements.
  • Prepare the listed workbook page and an offline Career Centre option if devices are limited.
  • Preselect two to six Career Centres appropriate to the activity.
  • Prepare accessible roles so every student can contribute through measuring, observing, recording, organizing, testing or presenting.

Materials

  • Student workbook or printed activity page
  • Trade Tracks Career Centres or printed screenshots
  • Pencils/markers and chart paper as needed
  • Teacher-approved classroom-safe task materials
  • Metric/imperial measuring tools where relevant

Minds-On — 8–10 minutes

Show a familiar object, image, work order, drawing or short scenario connected to the lesson. Ask students what they notice, what they would need to know before acting, and which details could affect safety, quality, cost or service.

Learn — 10–15 minutes

Model the key concept using think-aloud language. Explicitly distinguish observation from assumption. Where measurement appears, model unit labels and explain whether the task is being completed in metric, imperial, or both.

Hands-On Trade Task — Hazard Hunt Simulation

Inspect staged photographs or a teacher-created mock workspace, identify hazards and propose eliminate/control/PPE responses.

Student sequence: Plan → identify hazards/constraints → perform the classroom-safe task → check/measure → record evidence → improve or recommend a next step.

WHAT: Students name the actual action. WHY: They explain why technique/accuracy matters. WHO: They identify careers using similar work habits. HOW: They investigate a learning or apprenticeship pathway.

Measurement Practice

Canada is a dual-measurement workplace. Students should become comfortable reading and communicating both metric and imperial/US customary measurements where a trade commonly uses them. Use 1 inch = 25.4 mm exactly and 1 foot = 12 inches = 304.8 mm. For classroom estimation, 1 metre ≈ 3.28 feet. Teach students to work in the unit system specified on a drawing or work order, convert only when necessary, label every value with units, and avoid false precision after conversion.

Career Centre Investigation — 15–20 minutes

Suggested starting careers: Construction, industrial, motive power and service Career Centres. Students use WHAT / WHY / WHO / HOW to record two tasks, two skills, a workplace, one tool/technology, one pathway fact and one unanswered question. They should compare the Career Centre information with the behaviours used in the physical task.

Discussion Questions

  • What part of the task required the most attention?
  • What would change if this were real work for a customer, employer or community?
  • Where could a measurement, sequence or communication error cause a problem?
  • Which career used a similar skill in a different material or setting?
  • What would you need to learn before doing this professionally?

Workbook Evidence

Hazard Hunt. The student product for the lesson is Hazard Control Worksheet.

Assessment for / as / of Learning

  • For: teacher questioning during planning and task setup.
  • As: student self-check using evidence from the task.
  • Of: workbook product, Career Centre research and explanation of the task-career connection.

Differentiation & Accessibility

  • Offer measuring, observing, organizing, recording, building and presenting roles.
  • Provide pre-marked examples, larger-print drawings, visual steps, speech-to-text or scribe support as required.
  • Allow students to demonstrate understanding orally, visually or through a model where appropriate.
  • Do not assess physical speed or strength; assess reasoning, procedure, evidence and reflection.

Extension

Ask students to locate a second Career Centre from a different PATH area that uses the same transferable skill. Compare how the context, tools and consequences of accuracy differ.

Exit Ticket / Reflection

One professional safety behaviour is _____ because _____.

Grade 9 • Lesson 4 • 60–75 minutes

FOLLOW IT — How Apprenticeship Works

Purpose: Understand that apprenticeship combines paid workplace learning with technical instruction and requires a pathway into the trade.

Learning Goals

  • Explain the purpose of the day’s work in relation to understand career pathways.
  • Use evidence from an applied task or Career Centre rather than guessing.
  • Connect a skill, tool, workplace practice or pathway to at least one real career.
  • Communicate measurements with units and use metric/imperial information appropriately where relevant.

Success Criteria

  • I can complete the task safely and follow the agreed procedure.
  • I can describe WHAT I did and WHY accuracy, technique or planning mattered.
  • I can identify WHO uses a similar skill and HOW someone can learn it professionally.
  • I can record evidence in my workbook and identify a reasonable next question.

Teacher Preparation

  • Review the task and school safety requirements.
  • Prepare the listed workbook page and an offline Career Centre option if devices are limited.
  • Preselect two to six Career Centres appropriate to the activity.
  • Prepare accessible roles so every student can contribute through measuring, observing, recording, organizing, testing or presenting.

Materials

  • Student workbook or printed activity page
  • Trade Tracks Career Centres or printed screenshots
  • Pencils/markers and chart paper as needed
  • Teacher-approved classroom-safe task materials
  • Metric/imperial measuring tools where relevant

Minds-On — 8–10 minutes

Show a familiar object, image, work order, drawing or short scenario connected to the lesson. Ask students what they notice, what they would need to know before acting, and which details could affect safety, quality, cost or service.

Learn — 10–15 minutes

Model the key concept using think-aloud language. Explicitly distinguish observation from assumption. Where measurement appears, model unit labels and explain whether the task is being completed in metric, imperial, or both.

Hands-On Trade Task — Sequence the Pathway

Physically arrange pathway cards from exploration through training/work milestones, then build an alternate route when circumstances change.

Student sequence: Plan → identify hazards/constraints → perform the classroom-safe task → check/measure → record evidence → improve or recommend a next step.

WHAT: Students name the actual action. WHY: They explain why technique/accuracy matters. WHO: They identify careers using similar work habits. HOW: They investigate a learning or apprenticeship pathway.

Measurement Practice

Canada is a dual-measurement workplace. Students should become comfortable reading and communicating both metric and imperial/US customary measurements where a trade commonly uses them. Use 1 inch = 25.4 mm exactly and 1 foot = 12 inches = 304.8 mm. For classroom estimation, 1 metre ≈ 3.28 feet. Teach students to work in the unit system specified on a drawing or work order, convert only when necessary, label every value with units, and avoid false precision after conversion.

Career Centre Investigation — 15–20 minutes

Suggested starting careers: Three apprenticeable trades selected by class. Students use WHAT / WHY / WHO / HOW to record two tasks, two skills, a workplace, one tool/technology, one pathway fact and one unanswered question. They should compare the Career Centre information with the behaviours used in the physical task.

Discussion Questions

  • What part of the task required the most attention?
  • What would change if this were real work for a customer, employer or community?
  • Where could a measurement, sequence or communication error cause a problem?
  • Which career used a similar skill in a different material or setting?
  • What would you need to learn before doing this professionally?

Workbook Evidence

Apprenticeship Pathway Map. The student product for the lesson is Pathway Ladder.

Assessment for / as / of Learning

  • For: teacher questioning during planning and task setup.
  • As: student self-check using evidence from the task.
  • Of: workbook product, Career Centre research and explanation of the task-career connection.

Differentiation & Accessibility

  • Offer measuring, observing, organizing, recording, building and presenting roles.
  • Provide pre-marked examples, larger-print drawings, visual steps, speech-to-text or scribe support as required.
  • Allow students to demonstrate understanding orally, visually or through a model where appropriate.
  • Do not assess physical speed or strength; assess reasoning, procedure, evidence and reflection.

Extension

Ask students to locate a second Career Centre from a different PATH area that uses the same transferable skill. Compare how the context, tools and consequences of accuracy differ.

Exit Ticket / Reflection

A pathway is not one straight line because _____.

Grade 9 • Lesson 5 • 60–75 minutes

PLAN IT — My Next Experience

Purpose: Choose a realistic next exploration experience, not a permanent career decision.

Learning Goals

  • Explain the purpose of the day’s work in relation to understand career pathways.
  • Use evidence from an applied task or Career Centre rather than guessing.
  • Connect a skill, tool, workplace practice or pathway to at least one real career.
  • Communicate measurements with units and use metric/imperial information appropriately where relevant.

Success Criteria

  • I can complete the task safely and follow the agreed procedure.
  • I can describe WHAT I did and WHY accuracy, technique or planning mattered.
  • I can identify WHO uses a similar skill and HOW someone can learn it professionally.
  • I can record evidence in my workbook and identify a reasonable next question.

Teacher Preparation

  • Review the task and school safety requirements.
  • Prepare the listed workbook page and an offline Career Centre option if devices are limited.
  • Preselect two to six Career Centres appropriate to the activity.
  • Prepare accessible roles so every student can contribute through measuring, observing, recording, organizing, testing or presenting.

Materials

  • Student workbook or printed activity page
  • Trade Tracks Career Centres or printed screenshots
  • Pencils/markers and chart paper as needed
  • Teacher-approved classroom-safe task materials
  • Metric/imperial measuring tools where relevant

Minds-On — 8–10 minutes

Show a familiar object, image, work order, drawing or short scenario connected to the lesson. Ask students what they notice, what they would need to know before acting, and which details could affect safety, quality, cost or service.

Learn — 10–15 minutes

Model the key concept using think-aloud language. Explicitly distinguish observation from assumption. Where measurement appears, model unit labels and explain whether the task is being completed in metric, imperial, or both.

Hands-On Trade Task — Mini Job Setup

Given a mock task, select safe tools/materials, sequence steps, estimate dimensions/quantities in both systems, and identify who could teach or supervise it.

Student sequence: Plan → identify hazards/constraints → perform the classroom-safe task → check/measure → record evidence → improve or recommend a next step.

WHAT: Students name the actual action. WHY: They explain why technique/accuracy matters. WHO: They identify careers using similar work habits. HOW: They investigate a learning or apprenticeship pathway.

Measurement Practice

Canada is a dual-measurement workplace. Students should become comfortable reading and communicating both metric and imperial/US customary measurements where a trade commonly uses them. Use 1 inch = 25.4 mm exactly and 1 foot = 12 inches = 304.8 mm. For classroom estimation, 1 metre ≈ 3.28 feet. Teach students to work in the unit system specified on a drawing or work order, convert only when necessary, label every value with units, and avoid false precision after conversion.

Career Centre Investigation — 15–20 minutes

Suggested starting careers: Student-selected Career Centres. Students use WHAT / WHY / WHO / HOW to record two tasks, two skills, a workplace, one tool/technology, one pathway fact and one unanswered question. They should compare the Career Centre information with the behaviours used in the physical task.

Discussion Questions

  • What part of the task required the most attention?
  • What would change if this were real work for a customer, employer or community?
  • Where could a measurement, sequence or communication error cause a problem?
  • Which career used a similar skill in a different material or setting?
  • What would you need to learn before doing this professionally?

Workbook Evidence

Final Pathway Map. The student product for the lesson is Career Pathway Map.

Assessment for / as / of Learning

  • For: teacher questioning during planning and task setup.
  • As: student self-check using evidence from the task.
  • Of: workbook product, Career Centre research and explanation of the task-career connection.

Differentiation & Accessibility

  • Offer measuring, observing, organizing, recording, building and presenting roles.
  • Provide pre-marked examples, larger-print drawings, visual steps, speech-to-text or scribe support as required.
  • Allow students to demonstrate understanding orally, visually or through a model where appropriate.
  • Do not assess physical speed or strength; assess reasoning, procedure, evidence and reflection.

Extension

Ask students to locate a second Career Centre from a different PATH area that uses the same transferable skill. Compare how the context, tools and consequences of accuracy differ.

Exit Ticket / Reflection

My next useful career-learning experience would be _____.

Culminating Activity

Career Pathway Map — school → experience → training/apprenticeship → occupation, with at least two alternate routes.

Assess career understanding, evidence use, transferable-skill reasoning, pathway awareness and reflection. Do not assess whether a student chooses a skilled-trades career.

Scroll to Top