Trade Tracks 220 Forfar St. E. Fergus, Ontario N1M 2X7 519 831 5436 tradetracks.swcl@gmail.com
Showcase 2027 · May 28, 2027


← Back to Student Activities

Safety and supervision

Educators are responsible for assessing each activity, selecting age-appropriate tools and materials, providing appropriate instruction and supervision, and complying with all school, school-board, facility and applicable health and safety requirements. Activities must be modified or omitted when appropriate.

Discover the World of Skilled Work

Grade 6 Hands-On Trade Tasks

Five safe applied activities connected directly to PATH and Career Centres

Hands-On Progression

Grade 6: Touch • Identify • Measure • Observe

These are physical approximations of skilled-work behaviours, not simulations that require students to perform regulated or hazardous trade work.

All activities are classroom approximations of skilled work. Use only teacher-approved materials, tools and spaces. Do not perform energized electrical work, vehicle repair, pressurized-system work, hot work, cutting/grinding, work at height, or power-tool operations unless the school already permits the activity and a qualified teacher provides the required supervision, PPE and procedures. Students may stop an activity when unsure or unsafe.
Canada is a dual-measurement workplace. Students should become comfortable reading and communicating both metric and imperial/US customary measurements where a trade commonly uses them. Use 1 inch = 25.4 mm exactly and 1 foot = 12 inches = 304.8 mm. For classroom estimation, 1 metre ≈ 3.28 feet. Teach students to work in the unit system specified on a drawing or work order, convert only when necessary, label every value with units, and avoid false precision after conversion.
Goes with Activity g6-l1 · Lesson 1

Task 1

Tape Measure Challenge

Measure classroom objects first in millimetres/centimetres, then in inches. Estimate before measuring and discuss why accuracy matters.

Setup

  • Use only teacher-approved classroom-safe materials.
  • Provide a clear start/stop signal and accessible student roles.
  • Demonstrate the measurement/tool procedure before students begin.
  • Prepare a no-device Career Centre option if needed.

Student Work Cycle

Plan → Measure/Observe → Do → Check/Test → Record → Improve/Recommend

Trade Connection

Carpenter; Industrial Electrician; Horticultural Technician; Welder

WHAT / WHY / WHO / HOW

WHAT What physical or thinking action did I perform?
WHY Why did safety, accuracy, sequence, quality or service matter?
WHO Which workers use a similar skill?
HOW How would someone learn and practise this professionally?
Goes with Activity g6-l2 · Lesson 2

Task 2

Tools Around Us

Handle or examine classroom-safe hand tools or photographs. Match each tool to a task, PATH area and possible career; identify metric/imperial markings when present.

Setup

  • Use only teacher-approved classroom-safe materials.
  • Provide a clear start/stop signal and accessible student roles.
  • Demonstrate the measurement/tool procedure before students begin.
  • Prepare a no-device Career Centre option if needed.

Student Work Cycle

Plan → Measure/Observe → Do → Check/Test → Record → Improve/Recommend

Trade Connection

Six to twelve teacher-selected Career Centres across all PATH areas

WHAT / WHY / WHO / HOW

WHAT What physical or thinking action did I perform?
WHY Why did safety, accuracy, sequence, quality or service matter?
WHO Which workers use a similar skill?
HOW How would someone learn and practise this professionally?
Goes with Activity g6-l3 · Lesson 3

Task 3

Build It — Paper Structure

Build a freestanding structure supporting a light object at least 200 mm (about 8 in) above the table. Plan, measure, test, modify and record evidence.

Setup

  • Use only teacher-approved classroom-safe materials.
  • Provide a clear start/stop signal and accessible student roles.
  • Demonstrate the measurement/tool procedure before students begin.
  • Prepare a no-device Career Centre option if needed.

Student Work Cycle

Plan → Measure/Observe → Do → Check/Test → Record → Improve/Recommend

Trade Connection

Carpenter; Welder; Machinist; Heavy Equipment Technician

WHAT / WHY / WHO / HOW

WHAT What physical or thinking action did I perform?
WHY Why did safety, accuracy, sequence, quality or service matter?
WHO Which workers use a similar skill?
HOW How would someone learn and practise this professionally?
Goes with Activity g6-l4 · Lesson 4

Task 4

Route and Materials Measure

Use a simple room or site sketch to measure a route in centimetres/metres and inches/feet. Discuss where electricians, plumbers and transport workers need accurate routes.

Setup

  • Use only teacher-approved classroom-safe materials.
  • Provide a clear start/stop signal and accessible student roles.
  • Demonstrate the measurement/tool procedure before students begin.
  • Prepare a no-device Career Centre option if needed.

Student Work Cycle

Plan → Measure/Observe → Do → Check/Test → Record → Improve/Recommend

Trade Connection

Two contrasting Career Centres from different PATH areas

WHAT / WHY / WHO / HOW

WHAT What physical or thinking action did I perform?
WHY Why did safety, accuracy, sequence, quality or service matter?
WHO Which workers use a similar skill?
HOW How would someone learn and practise this professionally?
Goes with Activity g6-l5 · Lesson 5

Task 5

Produce / Help Mini-Task

Lay out a small paper garden bed or service station using given dimensions in both systems, then explain how planning helps people and resources work efficiently.

Setup

  • Use only teacher-approved classroom-safe materials.
  • Provide a clear start/stop signal and accessible student roles.
  • Demonstrate the measurement/tool procedure before students begin.
  • Prepare a no-device Career Centre option if needed.

Student Work Cycle

Plan → Measure/Observe → Do → Check/Test → Record → Improve/Recommend

Trade Connection

Student-selected Career Centre

WHAT / WHY / WHO / HOW

WHAT What physical or thinking action did I perform?
WHY Why did safety, accuracy, sequence, quality or service matter?
WHO Which workers use a similar skill?
HOW How would someone learn and practise this professionally?
Scroll to Top